| Specifications |
| * Note: Many specifications are programmable within a defined range or list of options. Please see the Administration Guide for details. The target configuration profile is uploaded to the SPA8000 at the time of provisioning. |
| Data networking |
- MAC address (IEEE 802.3)
- IPv4 (RFC 791), upgradable to v6 (RFC 1883)
- Address Resolution Protocol (ARP)
- DNS A record (RFC 1706), SRV record (RFC 2782)
- Dynamic Host Configuration Protocol (DHCP) client (RFC 2131)
- DHCP server (RFC 2131)
- Point-to-Point Protocol over Ethernet (PPoE) client (RFC 2516)
- Internet Control Message Protocol (ICMP) (RFC 792)
- TCP (RFC 793)
- User Datagram Protocol (UDP) (RFC 768)
- Real Time Protocol (RTP) (RFC 1889, 1890)
- Real Time Control Protocol (RTCP) (RFC 1889)
- Differentiated Services (DiffServ) (RFC 2475), type of service (ToS) (RFC 791, 1349)
- VLAN tagging (IEEE 802.1p)
- Simple Network Time Protocol (SNTP) (RFC 2030)
- Upload data rate limiting-static and automatic
- Quality of service (QoS)-voice packet prioritization over other packet types
- MAC address cloning
- Port forwarding
- Session Initiation Protocol (SIP) channels support both UDP and TCP transport
- VPN pass-through with IP Security encapsulating security payload (IPsec ESP), Point-to-Point Tunneling Protocol (PPTP), and Layer 2 Tunneling Protocol (L2TP)
|
| Voice gateway |
- SIP v2 (RFC 3261, 3262, 3263, 3264)
- SIP proxy redundancy-dynamic via DNS SRV, A records
- Reregistration with primary SIP proxy server
- SIP support in Network Address Translation (NAT) networks (including Serial Tunnel [STUN])
- Secure (encrypted) calling via prestandard implementation of Secure RTP
- Codec name assignment
- G.711 (a-law and µ-law)
- G.726 (16/24/32/40 kbps)
- G.729 A
- G.723.1 (6.3 kbps, 5.3 kbps)
- Dynamic payload
- Adjustable audio frames per packet
- Fax tone detection pass-through
- Fax pass-though (using G.711)
- Dual-tone multifrequency (DTMF): in-band and out-of-band (RFC 2833) (SIP info)
- Flexible dial plan support with interdigit timers and IP dialing
- Call progress tone generation
- Jitter buffer-adaptive
- Frame loss concealment
- Full-duplex audio
- Echo cancellation (G.165/G.168)
- Voice activity detection (VAD) with silence suppression
- Comfort noise generation (CNG)
- QoS (Ethernet port upstream bandwidth control, physical port, MAC address, application)
- Attenuation/gain adjustments
- Flash hook timer
- Message waiting indicator (MWI) tones
- Visual message waiting indicator (VMWI) via frequency shift keying (FSK)
- Polarity control
- Hook flash event signaling
- Caller ID generation (name and number)-Bellcore, DTMF, European Telecommunications Standards Institute (ETSI)
- Music on hold client
- Streaming audio server-up to 10 sessions
- System dial-on-demand routing (DDR) synchronous dynamic RAM (SDRAM)-16 MB
- System flash ROM-4 MB
|
| Security |
- Password-protected system reset to factory default
- Password-protected administrator and user access authority
- Provisioning/configuration/authentication:
- HTTPS with factory-installed client certificate
- HTTP digest-encrypted authentication via MD5 (RFC 1321)
- Authentication: Extensible Authentication Protocol Transport Layer Security (EAP-TLS), EAP Tunneled Transport Layer Security (EAP-TTLS), and Protected EAP (PEAP)
- SIP TLS
- Up to 256-bit Advanced Encryption Standard (AES) encryption
|
| Provisioning, administration, and maintenance |
- Web browser administration and configuration via integral web server
- Telephone keypad configuration with interactive voice prompts
- Automated provisioning and upgrade via HTTPS, HTTP, Trivial File Transfer Protocol (TFTP)
- Asynchronous notification of upgrade availability via NOTIFY
- Nonintrusive, in-service upgrades
- Report generation and event logging
- Stats in BYE message
- Syslog and debug server records
- Per-line and purpose configurable syslog and debug options
|
| Physical interfaces |
- 8-port standard FXS voice ports (RJ-11)
- RJ-21 (50-pin telco connector) multiport voice connection
- 1 WAN 100BASE-T RJ-45 Ethernet Port (IEEE 802.3)
- Reset button
|
| Subscriber line interface circuit (SLIC) |
- Ring voltage: 40-90 Vpk configurable
- Ring frequency: 20-25 Hz
- Ring waveform: trapezoidal
- Maximum ringer load: 5 ringer equivalence numbers (RENs)
- On-hook/off-hook characteristics:
- On-hook voltage (tip/ring): -46 ~ -56V
- Off-hook current: 18-25 mA
- Terminating impedance: 600 ohm resistive or 270 ohm + 750 ohm
- 150 nF complex impedance
- Frequency response 300-3400 Hz
- Return loss (600 ohm, 300-3400 Hz) up to 20 dB
- Insertion loss (1 Vrms at 1 kHz) 3-4 dB
- Total harmonic distortion (THD) (350 mV peak at 300 Hz) up to 3%
- Idle channel noise-72 dB (typical)
- Longitudinal balance 55 dB (typical)
- Off-hook threshold (line seizure) Rdc < 1000 ohm
- On-hook threshold (line release) Rdc >10000 ohm
- Rdc DC supervisory range Rdc > 450 ohm
|
| Regulatory compliance |
FCC (Part 15 Class B), CE, ICES-003, C-Tick certification, Restriction of Hazardous Substances (RoHS), UL |
| Power supply |
- Switching type (100-240V) automatic
- DC input voltage: 12V DC at 3.0A max.
- Power adapter: 100-240V, 50-60 Hz AC input
|
| Indicator lights/LEDs |
Power, Ethernet, Voice Status, Phone 1 through 8 |
| Documentation |
Quick installation, user, and configuration guides
Administration guide-service providers only
Provisioning guide-service providers only
|
| Environmental |
Dimensions
W x H x D
|
6.69 x 1.54 x 8.66 in.
(170 x 39 x 220 mm)
|
| Weight |
2.85 lb (1.30 kg) |
| Operating temperature |
32° to 113°F (0° to 45°C) |
| Storage temperature |
-13° to 185°F (-20° to 85°C) |
| Operating humidity |
10% to 90% noncondensing, operating and nonoperating |
| Storage humidity |
10% to 90% noncondensing, operating and nonoperating |
| Package Contents |
- Cisco SPA8000 8-Port IP Telephony Gateway
- 12V power adapter
- RJ-45 Ethernet cable
- Quick installation guide
|
| Product Warranty |
| 1-year limited hardware warranty with return to factory replacement and 90-day limited software warranty. |
Facebook
Twitter
Site Map